|
Wheel Balancing Machine High Technology of Vertical Spindle With its very sensitive measuring technology and a new electronic system, the Accurate - D can complete a measuring sequence in approximate 7 seconds at 440 revolutions per minute. This makes many things simpler.
Clamping and balancing accuracyThe vertical spindle enables a high degree of clamping accuracy and thereby the best possible balancing. Powerful motor and high loading capacity The drive motor has peen selected for frequent cycling and fast run-up and the 60 kg loading- .capacity accommodate light commercial wheels as well. Minimal floor space requirement No need for special foundations or fixing bolts. A floor space of only 0.9 m2 is sufficient. Normal hard workshop floor allows the free-standing installation of the Accurate-D. Simple operation combined with a high degree of safety It is a thoroughly rationalized working station. All operations can be performed from the front of the machine. An electrical inter-locking device does not permit the starting of the machine, unless safety guard is down. Accessories A pack consisting of the mounting accessories shown in the illustration is sufficient to deal with most passenger car and light commercial wheels. For special requirements, we offer a wide variety of adapters. Tyre adapter for 10" to 19" Rim size is also offered along with these machines. Truly universal balancing machines Suitable for the accurate balancing of passenger car and motor-cycle wheels-statically and dynamically. Conversion of the machine for motor-cycle wheel requires only the loosening of one single screw in a few seconds. Features
- Based on German Technology
- Only Machine in India with Accuracy of 0.1 grams
- Operating speed 440 rpm
- Suitable for all Cars, Motorcycles & L.C.V also
- Vertical Mounting of Wheel to reduce effect of force of gravity
- Spindle mounted on center of the machine.
- No need of temporary calibration.
- Unbalance indication in grams and ounces.
- High repeatability.
- Suitable for Alloy rims.
- Setting dials for wheel dimensions with cm and inch scales.
- Simultaneous indication in top plane and bottom plane
- Selector switch for dynamic-static operation.
- Push-button for starting and stopping the machine.
- Life time accuracy guaranteed.
|
Technical Data" Accurate - D"
|
|
Rim width
|
2 - 12 inches I 7 - 32 c.m.
|
|
Values can be set on cm or inch scales
|
|
Rim diameter
|
10 - 20 inches I 28-53
|
|
Values can be set on cm or inch scale
|
|
Max. wheel weight
|
60 kg
|
|
Power supply
|
40 V, 50 Hz, 3-Phase/ 220V, 50Hz, 1-Phase
|
|
Machine weight
|
approx. 180 kg.
|
|
Machine dimensions
|
Width 1175 mm Depth 880 mm Height 1525 mm
|
|
Min distance from wall
|
110 mm
|
|
Measuring cycle
|
approx. 7secx
|
|
